Publicidad
Idiomas disponibles
Idiomas disponibles
Symptoms
• Disc cannot be played back.
• Noise is generated.
• A longer readout time is required
("READING" keeps flashing on the
display).
• Tracks do not play back in the order you
have intended them to play.
• The elapsed playing time is not correct.
• "NO FILE" appears on the display.
• "NOT SUPPORT" appears on the display
and track skips.
• The correct characters are not displayed
(e.g. album name).
• Noise is generated.
• "READING" keeps flashing on the display. • Readout time varies depending on the USB device.
• "NO FILE" appears on the display.
*
1
Folder that is physically empty or folder that contains data but does not contain valid MP3/WMA track.
36
Remedies/Causes
• Use a disc with MP3/WMA tracks recorded in a format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the file
names.
Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or WMA
tracks.)
Do not use too many hierarchical levels and folders.
The playback order is determined when the files are
recorded.
This sometimes occurs during playback. This is caused by
how the tracks are recorded on the disc.
Selected folder is an empty folder *
that contains MP3/WMA tracks.
Check whether the track is a playable file format.
This unit can only display letters (upper case), numbers,
and a limited number of symbols. (See page 24.)
The track played back is not an MP3/WMA track. Skip to
another file. (Do not add the extension code <.mp3> or
<.wma> to non-MP3 or WMA tracks.)
• Do not use too many hierarchy or folders.
• Turn off the power then on again.
• Do not pull out or connect the USB device repeatedly
while "READING" is displayed on the display.
Check whether the selected folder, the connected USB
device, or the iPod/iPhone contains a playable file.
. Select another folder
1
Publicidad
