Publicidad
Idiomas disponibles
Idiomas disponibles
Other Functions
Adjusting the sound
characteristics
1
Select the item you want to adjust by
pressing (SEL) repeatedly.
VOL (volume) n BAS (bass) n TRE
(treble) n BAL (balance) n FAD (fader)
2
Adjust the selected item by pressing
either (+) or (–).
Adjust within three seconds after selecting.
(After three seconds the button will again
serve as the volume control button.)
Muting the sound
Press (MUTE).
The "MUTE" indication flashes.
To restore the previous volume level, press
again.
All manuals and user guides at all-guides.com
Changing the sound and
beep tone
Boosting the bass sound — D-bass
You can enjoy clear and powerful bass sound.
The D-bass function boosts the low frequency
signal with a sharper curve than conventional
bass boost.
You can hear the bass line more clearly even if
the vocal sound is the same volume. You can
emphasize and adjust the bass sound easily
with the D-BASS control. This effect is similar
to the one you get when you use an optional
subwoofer system.
Adjusting the bass curve
To cancel, turn the control to the OFF position.
Muting the beep tone
Analog D-bass
D-BASS 3
D-BASS 2
D-BASS 1
0dB
Frequency (Hz)
Turn the D-BASS control to adjust the
bass level (1, 2 or 3).
"D-BASS" appears in the display.
Press (6) while pressing (SEL).
To obtain the beep tone again, press these
buttons again.
EN
11
Publicidad
