Milwaukee M18 CCS55-0 Manual Original página 22

TECHNICAL DATA
Circular saw
Production code
No-load speed
Saw blade dia. x hole dia
Saw blade thickness
Blade teeth
Max. Cutting depth at 90° / 45°
Battery voltage
Weight according EPTA-Procedure 01/2014 (Li-Ion 2,0 Ah ... 12,0 Ah)
Recommended Ambient Operating Temperature
Recommended battery types
Recommended charger
Noise information
Measured values determined according to BS EN 62841. Typically, the A-weighted noise levels of the tool are::
GB
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to BS EN 62841
Sawing of wood: Vibration emission value a
Uncertainty K=
WARNING
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in
BS EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration and noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
Wear ear protectors. Exposure to noise can cause hearing loss.
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
CIRCULAR SAW SAFETY WARNINGS
Cutting procedures
a) DANGER: Keep hands away from cutting area and
the blade. Keep your second hand on auxiliary handle, or
motor housing. If both hands are holding the saw, they cannot be
cut by the blade.
b) Do not reach underneath the workpiece. The guard cannot
protect you from the blade below the workpiece.
English Deutsch
24 24
h,W
c) Adjust the cutting depth to the thickness of the work-
piece. Less than a full tooth of the blade teeth should be visible
below the workpiece.
d) Never hold the workpiece in your hands or across
your leg while cutting. Secure the workpiece to a stable
platform. It is important to support the work properly to minimise
body exposure, blade binding, or loss of control.
e) Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting accessory
may contact hidden wiring. Contact with a „live" wire will also
make exposed metal parts of the power tool „live" and could give
the operator an electric shock.
f) When ripping, always use a rip fence or straight edge
guide. This improves the accuracy of cut and reduces the chance
of blade binding.
M18 CCS55
4462 24 05 ...
... 000001-999999
5000 min
-1
165 x 15,88 mm
1,6 mm
24 T
55 / 40 mm
18 V
3,96 kg...5,13 kg
-18°C ... +50°C
M18B...M18HB...
M12-18...M1418 C6
80,8 dB(A)
91,8 dB(A)
2,45 m/s
2
1,5 m/s
2