Publicidad
Idiomas disponibles
Idiomas disponibles
General Safety
Warnings for Power Tools in
Household Use
WARNING!
►
Read all safety warnings and all instructions .
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury .
Save all warnings and instructions for future
reference.
This appliance may be used by
■
children aged 8 years and above
and by persons with limited phy sical,
sensory or mental capabilities or
lack of experience and know ledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks . Children must
not play with the appliance .
Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised .
■
To avoid potential risks, damaged mains cables
should be replaced by the manufacturer, their
customer service department or a similarly
qualified person .
Additional safety instructions for
glue guns
■
Children should be supervised to ensure that
they do not play with the appliance .
■
CAUTION! This appliance must be placed on
its stand when not in use .
■
Always protect the appliance from rain and
moisture . Water entering a power tool will
increase the risk of electric shock .
PHP 500 E3
■
Do not misuse the power cord, e .g . to carry or
hang up the appliance, or to pull the plug from
the socket . Keep cord away from heat, oil,
sharp edges or moving parts . If the power cord
is damaged or severed during work, do not
touch the cord but rather pull out the power
plug . Damaged or entangled cords increase the
risk of electric shock .
■
Only for indoor use .
■
If you take a break of longer than 30 minutes,
pull out the power plug .
■
Allow the appliance to cool completely after
use and before storage .
■
Do not work on any material containing asbestos .
■
Avoid the risk of injury or fire as well
as health risks: RISK OF BURNS! The
200
adhesive and the nozzle reach a temperature of
around 200°C . Do not touch the nozzle or the
glue . Do not allow hot glue to come into contact
with people or animals . In case of contact with
skin, rinse the affected part in cold running water
for a few minutes . Do not attempt to remove the
adhesive from the skin .
■
Always route the power cable towards the rear,
away from the appliance .
■
Do not pull back the glue stick!
Cut it off to store the device in the
carrying case .
Operation
Before use
Preparing the surfaces to be glued
■
Do not use flammable solvents to clean the
surfaces to be glued .
■
The ambient temperature and the materials to
be bonded may not be colder than 5°C and
not warmer than 50°C .
■
The area to be glued must be clean, dry and
free of grease .
♦
Smooth surfaces should be roughened before
gluing .
♦
Quick-cooling materials such as steel should be
warmed a little to facilitate adhesion .
GB │ MT
│
21
■
Publicidad
