Publicidad
1
1
2
1
3
4
2
2
English
Installation
To insure correct operation of the faucet, the
hot valve must be on the left, and the cold
valve must be on the right.
Install the mounting nut, metal washer, and
fiber washer on the valve.
(1) Push the valve up through the mounting
surface.
(2) Install the stop ring and mounting ring.
The stop ring will stop the mounting ring at the
proper position.
Rest the valve on the mounting surface.
(1) Tighten the mounting nut by hand.
(2) Tighten the tensioning screws using a
screwdriver.
Place the spout deco ring and spout on the
mounting surface.
Install the mounting flange.
Tighten the mounting collar.
Publicidad
