Graco PD316986D 9/16 Manual De Instrucciones página 67

Using Belt Positioning Clip
1. Make Sure Vehicle's Seat Shoulder Belt Lays in
the Red Zone As Shown
If the vehicle's seat shoulder belt lays outside this zone,
you MUST use the belt positioning clip.
2. Attach Belt Positioning Clip
The shoulder belt positioning clip MUST be attached to
the slot on the bottom of the base. Insert the loop end of
strap through the slot on bottom of seat exactly where
shown.
3. Push Clip and Strap
Through Loop
Pass the clip and the strap
through the loop end as shown and pull strap up.
67