Publicidad
Idiomas disponibles
Idiomas disponibles
Lap Belt Installation - DO NOT use in Booster Mode
Always review your vehicle owner's manual for specific information about
your vehicle seat belts.
Locking Latch Plate and No Retractor
When installing the car seat, route the lap seat belt
through the proper path and buckle it in. Then, pull
upwards on the tail of the belt so that the lap belt gets
tight around the car seat.
Sewn On Latch Plate and ALR
Slowly pull the lap belt all the way out. Route the
vehicle seat lap belt through the proper belt path and
buckle it in. Then, pull the lap belt tight while feeding all
the slack back into the retractor.
Grab the sides of the
seat at the belt path
and slide the seat
side-to-side and front-
to-back. The seat
should not move more
than 1 " (2.5 cm).
81
Publicidad
