Descargar Imprimir esta página

Dacor DRF487 Serie Manual Del Usuario página 50

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting
Before calling for service, review the checkpoints below. Any service calls regarding
normal situations (No Defect Cases) will be charged to users.
General
Temperature
Symptom
Fridge/freezer does
not operate.
Fridge/freezer
temperature is warm.
Fridge/freezer is
over-cooling.
Interior wall is hot.
50
English
Dacor_T-TYPE_BRF9000C_DA68-03574K-00_EN.indd 50
Possible causes
• Power cord is not plugged
in properly.
• Temperature control is not
set correctly.
• Refrigerator is located near
a heat source or direct
sunlight.
• Not enough clearance
between refrigerator and
nearby walls or cabinets.
• The refrigerator is
overloaded. Food is
blocking the refrigerator
vents.
• Temperature control is not
set correctly.
• Refrigerator has heat-proof
piping in the interior wall.
Solution
• Properly plug in the power
cord.
• Set the temperature lower.
• Keep the refrigerator away
from direct sunlight or a
heat source.
• Make sure there is a gap of
at least 2.5 inches (5 cm)
between the refrigerator
back and sides and any
nearby walls or cabinets.
• Do not overload the
refrigerator. Do not allow
food to block vents.
• Set the temperature higher.
• To prevent condensation
from forming, the
refrigerator has heat-proof
piping in the front corners.
If the ambient temperature
rises, this equipment may
not work effectively. This is
not a system failure.
2023-03-15( )
2:50:30

Publicidad

loading

Este manual también es adecuado para:

Drf485 serie