GE ASQ28 Manual Del Propietario E Instrucciones De Instalación página 12

Window Installation Instructions
8 INSTALL THE SECURITY
BRACKET AND THE FOAM TOP
WINDOW GASKET
Attach the security bracket with a type B
A
screw.
B
Cut the foam top window gasket to the
window width.
C
Stuff the foam between the glass and the
window to prevent air and insects from
getting into the room.
9 INSTALL THE AIR CONDITIONER
IN THE CASE
Slide the air conditioner into the case.
A
Reinstall the 2 front side ground screws
removed earlier on each side of the case.
IMPORTANT: The ground screws must be
reinstalled to ensure a proper ground.
Place the bottom inner case gasket between
B
the bottom of the air conditioner and the
inside bottom of the case. Fold up the ends
on both sides and push them in.
Front of air
conditioner
Attach the front grille to the case by inserting
C
the tabs on the grille into the slots on the
front of the case. Push the grille in until it
snaps into place.
Guide the lever
carefully through the
grille as you push it in.
Secure the front grille to the case by
D
replacing the screw removed in Step 4.
Replace the filter and the inlet grille.
Caulk or weather-strip any gaps or
openings to the outside to seal the
installation.
The installation is now complete.
12
Bottom inner
case gasket