Garland NIPON 420 K Manual De Instrucciones página 36

English
The skirt of the protector must not be worn when
working with the cutting disk.
The transmission can be locked
by inserting a tool or screwdriver
through the transmission hole and
the notch on the plate (3).
6.2.3. CUTTING ACCESSORY DESCRIPTION
1. Steel disc.
2. 2 wire head.
3. Sheet with notch for coupling the head or disc.
4. Sheet.
5. Protective bell of the disc.
6. Protective hood of the disc.
7. Disc nut.
8. Saucer.
Protector
Protector flap
6.2.4. MOUNTING THE NYLON BUMP HEAD
1
3
6.2.4.1. CHANGE OF THE NYLON BUMP HEAD
36/144
2