Recommended Spare Parts; Troubleshooting - Nilfisk T75 Manual De Instrucciones

Recommended spare parts

The following is a list of spare parts that should be kept ready at hand in order to speed up maintenance operations.
Refer to the manufacturer's spare parts catalogue when ordering spare parts.
Problem
The vacuum cleaner suddenly stops.
Dust leaks from the vacuum cleaner.
Electrostatic current on the vacuum
cleaner.
The vacuum cleaner does not start
after emptying the container.
07/2018
Description
Star filter kit
Filter ring seal
Filter chamber gasket
Filter clamp
Absolute filter

Troubleshooting

Clogged main filter.
Clogged vacuum hose.
Circuit breaker tripped.
Liquid suction stop system activation.
The filter is torn.
Non existent or inefficient grounding.
The level monitoring system hose is
clogged.
Base FM
4089100052 408910053
- -
Cause
Shake the filter. Replace it if this is not
sufficient.
Check the vacuum hose and clean it.
Check the setting.
Check the motor electrical input.
Empty the container.
Contact an authorised after-sales
service centre if necessary.
Empty the container.
Replace it with another of identical
type.
Check all ground connections.
Especially check the connection at the
inlet.
Release the container and clean the
level sensor.
15
Model
AU FM AU
4089100052 408910053
Z8 17026
40000762
Z8 18079
4081700935
Remedy
T75
GB
C360