When To Calibrate; How To Calibrate; Auto/Off Function Setting; Warranty - Baxtran APC Manual De Usuario

User's Guide

WHEN TO CALIBRATE

Calilbration may be required when it is initially installed, if the scale/balance is moved to a substantial distance.
This is necessary because the weight of a mass in one location is not necessarily the same in another location.
Also, with time and use, mechanical deviations may occur.

HOW TO CALIBRATE

Press and keep
indicator, the display will show CAL then the A/D value. Press
which you set. Place the display weight on the platform then press
de A/D value, now calibration is complete.
AUTO-OFF FUNCTION SETTING
MAke sure the scale is off.
Press and hold the
The display will show SET (Do not release
While keeping the
The display will show A.OFF (you can now release the
Press the key to enter the auto off adjustment mode.
Press to scroll through the Auto off time adjustments.
Once the desired time is found press the
You can now turn the scale off and the auto off time will be set.
NOTE: When the recharging sign "
charged for ten hours for the first time, and then recharged for four hours for the next time.

WARRANTY

▪ This scale is warranted against defects of manufacturing and materials for a period of 1 year, from the delivery
date.
▪ During this period, GIROPÈS SL will take charge of repairing the scale.
▪ This warranty does not cover defects or damaged caused by misuse, overloading or improper installation
contrary to the recommendations described in this manual.
▪ This warranty does not cover shipping costs for the reparation of the balance.
14
key and key together then switch the power to ON which is on the left side of the
key (Do not release) and turn the scale on.
key down, press the
key to confirm.
"indicates, please charge the battery immediately. The scale needs to be
key, the display will show the calibration weight
key).
key three times.
key).
key, the display will show - - - - - - , then
Model APC