Limit Function; Zone Setting Close To 0 With No Acoustic Warning - Baxtran ADA Serie Manual De Instrucciones

10. LIMITS FUNCTION
To check that the weight of the object is within the predefined range of limits.
Symbols on the display: LOW / HIGH (with acoustic warning or OK indicator)
1. Enter the menu mode by pressing the
2. Press the key repeatedly until the message "InSPCT" is displayed.
3. Press the key
4. To set the upper limit (SET-HI), press the
5. Set the decimal point position by pressing the
6. Confirm the value with the
7. Set the upper limit value as follows:
1. Press
2. Press
8. Press the
9. Select the position of the decimal point by pressing the
10. Press the
12. Confirm by pressing the
13. Set the lower limit value as follows:
1. Press
2. Press

10.1 ZONE SETTING CLOSE TO 0 WITH NO ACOUSTIC WARNING

Within the INSPECT mode:
1. Press the
3. Set the value of the warning:
1. Press
2. Press
key
key
to increase the value.
to decrease the value.
key to set the lower limit value.
key repeatedly until the decimal point is in the correct position.
key
to increase the value.
to decrease the value.
key until "NoNres" is displayed. Press the
to increase the value.
to decrease the value.
key twice.
key repeatedly until the decimal point is in the correct position.
3. Press
4. Press
key twice.
3. Press
4. Press to confirm.
3. Press
4. Press to confirm.
USER'S MANUAL ADA-APD
and the value will blink.
to confirm.
and the value will blink.
and the value will blink.
EN EN
45