Load Cell Connection (Male); Rs232 Connection: Db-09 (Male); Printout Formats; Printing By Pressing A Key - Baxtran IKP Serie Manual De Usuario

IKP model
5. Calibration by the maximum capacity
DISPLAY
g lb/1000
XXXXX XXXXX
6000 3000
Pnt 3 Pnt3
Put on poise of full capacity of the scale. When the AD value becomes stable, press
calibration is complete.

LOAD CELL CONNECTION (MALE)

Pin setup: 1 (EXC+) 2 (EXC-) 3 (SIG+) 4 (SIG-)
RS232 CONENCTION: DB-09 (MALE)
Pin setup: 2 (TXD) 3 (RXD) 5 (GND) Others (NC)
This section is applicable only for models with RS232C modeule.

1. PRINTING BY PRESSING A KEY

SETTING PRESS M+
Print
PrESS
COUNTING 1:
---------------------------------------
Net Weight: <Weight format>
Piece Weight: <Weight format3>
Print
Piece Count: <Count format>
ALL.1
...
...
Print
ALL.2
Print
StAbLE.1
Print
Do not print
StAbLE.2
Print
oFF

2. PRINT AUTOMATICALLY WHEN THE WEIGHT IS STABLE

SETTING PRINTING WHEN THE WEIGHT IS STABLE
Print
Net Weight: <Weight format2>
StAbLE.1
Piece Weight: <Weight format3>
Print
Piece Count: <Count format>
ALL.1
Print
ALL.2
<Weight format>
Print
StAbLE.2
Print
PrESS
Sin impresión
Print
oFF
DESCRIPTION
Calibration unit displayed varies with preset weight unit
La primera hilera muestra el valor AD, la segunda muestra el valor de la capacidad máxima
(Unidad: gramos o lb/1000), y la tercera muestra el mensaje "Pnt 3".

7. PRINTOUT FORMATS

PRESS C KEY IN MR MODE
(1) To subtract the result of a single weighing
SUBRACT COUNTING:
--------------------------------------------------------------
Net Weight: <Weight format>
Piece Weight: <Weight format3>
Piece Count: <Count format>
(2) To print the accumulation of weighings
(when the total is on display)
TRANSACTION TOTAL
--------------------------------------------------------------
TOTAL PIECES of 2 COUNTING(S): <Count format>
Do not print
User's Guide
. The linearity
43