Using Bluetooth wireless technology
# Before disconnecting the cellular phone from
this unit, make sure to adjust the volume to a
proper level. If the volume is muted (zero level) on
your cellular phone, the volume level of your cel-
lular phone remains muted even after the cellular
phone is disconnected.
3
Microphone angle adjustment
The microphone needs to be pointed toward
the person speaking.
Making a phone call
Dial a number
The most basic way to make a call is to simply
dial the number.
For detailed instructions, refer to Making a call
by entering phone number on page 39.
Calling a number in the Phone Book
or the Call History
For detailed instructions, refer to Calling a
number in the phone book on the next page
and Using the missed, received and dialed call
lists on page 37.
Voice recognition
If your cellular phone features voice recogni-
tion technology, you can make a call by voice
commands.
! Operation varies depending on the type of
cellular phone. Refer to the instruction
manual that came with your cellular phone
for detailed instructions.
1
Press BAND/ESC/CANCEL and hold until
Voice dial appears in the display.
When Voice dial ON is displayed, voice recog-
nition function is ready.
# If your cellular phone does not feature voice
recognition function, NO VOICE DIAL appears in
the display and operation is not possible.
2
Pronounce the name of your contact.
Taking a phone call
Answering or rejecting an incoming call
% Answering an incoming call
When a call comes in, press
MULTI-CONTROL.
# You can also take a phone call by pressing
START on the remote control.
% End a call
Press PHONE/
/BT MENU.
# You can also end the call by pressing
CANCEL on the remote control.
% Rejecting an incoming call
When a call comes in, press PHONE/
BT MENU.
# You can also reject an incoming call by press-
ing
/CANCEL on the remote control.
Note
The estimated call time appears in the display
(this may differ slightly from the actual call time).
Operating a call waiting
% Answering a call waiting
When a call comes in, press
MULTI-CONTROL.
# You can also answer a call waiting by pressing
/START on the remote control.
% End all calls
Press PHONE/
/BT MENU.
# You can also end all calls by pressing
CANCEL on the remote control.
% Switch between callers on hold
Press MULTI-CONTROL.
# You can also switch between callers on hold
by pressing a on the remote control.
% Rejecting call waiting
Press PHONE/
/BT MENU.
# You can also reject call waiting by pressing
/CANCEL on the remote control.
Section
08
/
/
/
/
35
En