Initial Settings; Adjusting Initial Settings; Selecting The Language; Setting The Date - Pioneer Premier DEH-P710BT Manual De Instrucciones

Section
11

Initial Settings

Adjusting initial settings

Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
! Shows the function status.
1 Press SRC/OFF and hold until the unit
turns off.
2 Press MULTI-CONTROL and hold until
the initial setting menu appears in the dis-
play.
3 Turn MULTI-CONTROL to select one of
the initial settings.
Turn MULTI-CONTROL to switch between the
functions in the following order.
Language select (language selection)—
Calendar (calendar)—Clock (clock)—
Warning tone (warning tone)—AUX1 (auxili-
ary input 1)—AUX2 (auxiliary input 2)—
List guidance (voice guidance setting)—
Dimmer (dimmer)—Brightness (brightness)
—S/W control (rear output and subwoofer
controller)—Built-in AMP (power amp set-
ting)—Demonstration (feature demo)—
Reverse mode (reverse mode)—Ever-scroll
(ever scroll)—BT AUDIO (BT audio setting)—
BT Memory clear (clearing Bluetooth mem-
ory)—Software update (software update)
Use the following instructions to operate each
particular setting.
# To cancel initial settings, press
BAND/ESC/CANCEL.
48
En
1 1 1

Selecting the language

For your convenience, this unit equips multi-
ple language guidance. You can select the lan-
guage best suited to your first language.
1 Display the initial setting menu.
Refer to Adjusting initial settings on this page.
2 Use MULTI-CONTROL to select
Language select in the initial setting menu.
3 Push MULTI-CONTROL left or right to
select the language.
English—Français—Español
4 Press MULTI-CONTROL to determine
the selection.
# Display guidance and voice guidance are set
to the same language simultaneously.

Setting the date

The calendar display adjusted in this mode ap-
pears when the telephone source is selected
or sources and the feature demo are off.
1 Display the initial setting menu.
Refer to Adjusting initial settings on this page.
2 Use MULTI-CONTROL to select Calendar
in the initial setting menu.
Calendar appears in the display.
3 Push MULTI-CONTROL left or right to
select the segment of the calendar display
you wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the calendar display:
Day—Month—Year
As you select segments of the calendar dis-
play the segment selected will blink.
4 Push MULTI-CONTROL up or down to
set the date.
Pushing MULTI-CONTROL up will increase
the selected day, month or year. Pushing
MULTI-CONTROL down will decrease the se-
lected day, month or year.