Using The Pre-Programmed Settings - Oster BVLB07-L00 Manual De Instrucciones

uSINg YOuR OSTER
Before you use the product for the first time, separate the lid, jar lid
food chute and blade from the jar. Wash in warm, soapy water or
top rack in the dishwasher. Rinse and dry well.
ASSEMBLY
1. Install the sealing ring over the multi-functional blade.
Blade is sharp. Handle with care.
2. Turn the jar upside down so the small opening is at the top.
3. Turn the multi-functional blade with sealing ring upside down
and place into the bottom of the jar.
4. Position the open end of the threaded jar bottom over
the jar and sealing ring. Turn clockwise to tighten.
Note: Be sure the threaded jar bottom is locked securely to the jar
before using.
5. Snap on jar skirt.
6. Slide the jar onto the base.
7. Plug the power cord into a standard household 220-volt,
AC outlet. You are now ready to start.

USING THE PRE-PROGRAMMED SETTINGS

1. Press the ( ) button to turn the product on.
The power light will flash, meaning the product is active
and ready to use.
2. Choose a recipe from the recipe section of this manual or use
3
one of your own.
3
3. Put the ingredients into the jar.
4. Secure the filler cap and jar lid food chute.
2
5. Press one of the two Pre-Programmed Setting buttons
1
appropriate for your recipe. "Frozen Drinks" button (
"Food Chop" button ( 1
6. To change your selection, press (
another Pre-Programmed Setting button. Frozen Drinks (
Food Chop ( ).
7. O nce the program is finished, the product automatically stops.
Please note: You may press the (
program at any time. The blinking red light
indicates that the blender is ready.
3
8. Press ( ) button to turn the product off.
This product is pre-programmed to turn off automatically
3
if not used for a period of several minutes. All lights will
2
turn off when the unit automatically powers down.
3
1
3
1
2
1
)
) button followed by
3
3
3
) button to cancel the
2
3
3
1
2
3
1
1
2
1
1
1
E n g l i s h - 6
BLENDER
®
3
)
2
1
) or
3
3
2
3
3
1
3
2
1
1
2
1
1
3
1
3
1