General Safety Precautions; Safety; General Information - Ingersoll Rand SS3L3 Manual Del Propietário

62215.10.56
EN
DANGER
WARNING
CAUTION
NOTICE

GENERAL SAFETY PRECAUTIONS


Intake air can contain carbon monoxide or other contaminants��
Will cause serious injury or death�� Ingersoll Rand air compressors
are not designed, intended or approved for breathing air��
Compressed air should not be used for breathing air applications
unless treated in accordance with all applicable codes and
regulations��
Your air compressor unit is suitable for operating air tools, caulking
guns, grease guns, sandblasters, etc�� Depending on your application, the
following accessories may be required:
• An air pressure regulator to adjust the air pressure entering the tool or
accessory��
• An air line filter for removal of moisture and oil vapor in compressed
air��
• An in-line lubricator to prolong the life of air tools��
EN-4
Indicates an imminently hazardous
situation which, if not avoided, will result
in death or serious injury��
Indicates a potentially hazardous situation
which, if not avoided, could result in death
or serious injury��
Indicates a potentially hazardous situation
which, if not avoided, may result in minor
or moderate injury or property damage��
Indicates information or a company
policy that relates directly or indirectly to
the safety of personnel or protection of
property��
DANGER

GENERAL INFORMATION

SAFETY

A hazardous voltage can cause serious injury or death��
Disconnect power and bleed pressure from the tank before
servicing�� Lockout/tagout machine�� Compressor must be
connected to properly grounded circuit�� See grounding
instructions in manual�� Do not operate compressor in wet
conditions�� Store indoors��
Moving parts�� Can cause serious injury�� Do not operate with
guards removed�� Machine may start automatically�� Disconnect
power before servicing�� Lockout/tagout machine��
Hot surfaces�� Can cause serious injury�� Do not touch�� Allow to
cool before servicing�� Do not touch hot compressor or tubing��
High pressure air�� Bypassing, modifying or removing safety/relief
valves can cause serious injury or death�� Do not bypass, modify
or remove safety/relief valves�� Do not direct air stream at body��
Rusted tanks can cause explosion and severe injury or death��
Drain tank daily or after each use�� Drain valve located at bottom
of tank��
A caution risk of bursting�� Use only suitable air handling parts
acceptable for pressure of not less than the maximum allowable
working pressure of the machine��
• Separate air transformers which combine the functions of air
regulation and/or moisture and dirt removal��
Contact your nearest authorized dealer or call 1-800-AIR-SERV for more
information on air tools and accessories for your application��
WARNING
CAUTION
22204929 Rev B