Safety; General Safety Precautions - Ingersoll Rand TS4 Manual Del Propietario Con La Lista De Piezas

EN
Indicates an imminently hazardous
DANGER
situation which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation
WARNING
which, if not avoided, could result in death
or serious injury.
Indicates a potentially hazardous situation
CAUTION
which, if not avoided, may result in minor
or moderate injury or property damage.
Indicates information or a company
NOTICE
policy that relates directly or indirectly to
the safety of personnel or protection of
property.

GENERAL SAFETY PRECAUTIONS


DANGER
Intake air can contain carbon monoxide or other contaminants��
Will cause serious injury or death�� Ingersoll Rand air compressors
are not designed, intended or approved for breathing air��
Compressed air should not be used for breathing air applications
unless treated in accordance with all applicable codes and
regulations��
22207666 Rev. C
RELEASED 14/Mar/2018 13:53:20 GMT

SAFETY

WARNING
A hazardous voltage can cause serious injury or death��
Disconnect power and bleed pressure from the tank before
servicing�� Lockout/tagout machine�� Compressor must be
connected to properly grounded circuit�� See grounding
instructions in manual�� Do not operate compressor in wet
conditions�� Store indoors��
Moving parts�� Can cause serious injury�� Do not operate with
guards removed�� Machine may start automatically�� Disconnect
power before servicing�� Lockout/tagout machine��
Hot surfaces�� Can cause serious injury�� Do not touch�� Allow to
cool before servicing�� Do not touch hot compressor or tubing��
High pressure air�� Bypassing, modifying or removing safety/relief
valves can cause serious injury or death�� Do not bypass, modify
or remove safety/relief valves�� Do not direct air stream at body��
Rusted tanks can cause explosion and severe injury or death��
Drain tank daily or after each use�� Drain valve located at bottom
of tank��
CAUTION
A caution risk of bursting�� Use only suitable air handling parts
acceptable for pressure of not less than the maximum allowable
working pressure of the machine��
EN-