Braun Multi Quick 9 Serie Manual Del Usuario página 17

NOTE: Maximum kneading time: 1 minute – then
allow the motor to cool down for 10 minutes.
Recipe Example: Pizza dough
250 g plain flour
½ tsp salt
½ tsp dried yeast
5 tbsp olive oil
150 ml water (lukewarm).
• Put all ingredients except water into the bowl and
start kneading.
• Add water through the feed tube wihle the motor
is running.
Recipe Example: Sweet Pastry
250 g plain flour
170 g unsalted butter (cold/hard, small pieces)
80 g sugar
1 vanilla sugar
1 small egg
1 pinch salt
• Put butter and sugar into the bowl and start
kneading. For good results use cold butter.
• Add flour and the rest of the ingredients.
• Dough will become too soft from over kneading.
Stop kneading shortly after dough has formed a
ball.
• Cool down the dough in the refrigerator for half
an hour before proceeding.
Slicing / Shredding / Julienne / French Fry (F)
Use the fine and coarse slicing inserts (i) to slice
raw fruit and vegetables into fine, thin slices; e.g.
cucumbers, onions, mushrooms, apples, carrots,
radishes, potatoes, zucchini and cabbage.
Use the fine and coarse shredding inserts (ii) to
shred foods such as apples, carrots, potatoes,
beetroot, cabbage, cheese (soft to medium).
Use the julienne insert (iii) to cut fruit and vegetable
into julienne.
Use the French fry disc (11k) to prepare french fries.
Refer to the Processing Guide F for recommended
speeds.
Assembly and Operation
• For slicing / shredding / julienning place an insert
into the insert holder (11j) and snap into position.
Place the assembled insert holder or French fry
disc on the center pin of the bowl and give it a
turn so that it locks into place.
• Attach the lid to the bowl with the latch
positioned to the right of the bowl handle.
• To lock the lid, turn it clockwise so that the latch
engages with a click.
• Insert the motor part into the coupling until it
locks.
• Plug in the appliance and insert the food to be
processed into the feed tube.
5722112044_MQ9087X_INT_S6-152.indd 17 5722112044_MQ9087X_INT_S6-152.indd 17
• For best French fry results, place 3-4 potatoes
(depending on the size) in the feed tube of the lid
while the motor is switched off.
• Switch the appliance on to operate. Never reach
into the feed tube when the appliance is switched
on. Always use the pusher to feed in food.
• After use, unplug and press the release buttons
to detach the motor body.
• Press the lid latch and hold it. Turn the lid
counter-clockwise to unlatch it.
• Lift the lid up. Carefully take out insert holder or
French fry disc before pouring out the contents
of the bowl. To remove the insert holder or
French fry disc, slightly turn it then pull it off.
• To remove an insert, push it up at the one end
that protrudes at the bottom side of the insert
holder.
Care and Cleaning (G)
• Always clean the hand blender thoroughly after
use.
• Unplug hand blender before cleaning.
• Do not immerse the motor part (4) or gearboxes
(8a, 9a) in water or any other liquid. Clean with a
damp cloth only.
• The lid (11a) can be rinsed under running water.
Do not immerse in water, nor place in a
dishwasher.
• All other parts can be cleaned in a dishwasher.
Do not use abrasive cleaners that could scratch
the surface.
• You may remove the anti-slip rubber rings from
the bottom of the bowls for an extra thorough
clean.
• When processing foods with high pigment
content (e.g. carrots), the accessories may
become discolored. Wipe these parts with
vegetable oil before cleaning them.
Both the design specifications and these user
instructions are subject to change without notice.
Subject to change without notice.
Please do not dispose of the product in the
household waste at the end of its useful life.
Disposal can take place at a Braun Service
Centre or at appropriate collection points
provided in your country.
Materials and accessories coming
into contact with food conform
to EEC regulation 1935/2004.
17
31.05.16 13:53 31.05.16 13:53