KTM 63512923044 Instrucciones De Montaje página 28

5 MOUNTING
10
–
Repeat the steps for chambers
first six chambers are fitted with the correct tumblers.
–
Insert the key.
All tumblers must close flush with the locking cylin-
der.
500518-01
–
Position and insert the locking cylinder as shown (engaging
bk
plate
Engaging plate
500624-01
–
Pull up the locking lever.
–
Position locking plate
der as shown.
The plate faces to the right.
–
Mount and tighten screw
ded).
500625-01
–
Key position 90° to the left to open.
–
Key position upward for locking.
500626-01
Opening the cases
–
Pull up the locking device on both sides.
–
Open the catches on both sides.
–
Remove the cover upward.
Info
The case can also be opened on one side if requi-
red.
500627-01
B D
,
must be facing downward).
bk
engages.
3
(included) on the locking cylin-
5
with washer
F
, and until the
6
(both inclu-