KTM 63512923044 Instrucciones De Montaje página 32

7 OPTIONAL
14
–
Position and insert the locking cylinder as shown (engaging
bk
plate
Engaging plate
–
Pull up the locking device.
–
Position locking plate
locking cylinder as shown.
The plate faces to the right and the opening to the
front.
500633-01 –
Mount and tighten screw
with the case).
Info
The steps are the same on both sides.
–
Key position 90° to the left to open.
–
Key position upward for locking.
500634-01
Removing the locking cylinder
–
Key position 90° to the left.
–
Pull up the locking device.
–
Remove screw
–
Push engaging plate
–
Remove the locking cylinder.
Info
It is essential that the key remains in the locking
500635-01
cylinder.
Info
The steps are the same on both sides.
must point to the right).
bk
engages.
4
(included with the case) on the
5
with washer
5 6
with washer and locking plate
bk
into the locking cylinder.
6
(included
4
.