WAGNER F500 ELECTRONIC LED Manual Del Usuario página 13

FURNO 500
Name
5
4
1+2
3
IMPORTANT: Always use gloves when handling the Heat Gun.
To attach an optional item to the Heat Gun:
1. Set the Heat Gun upright on a level surface and wait until the tip is
cool.
2. Set the item onto the tip of the Heat Gun and push firmly into place by
hand.
Description
This tool has 5 functions. The blade is used to (1) scrape paint and (2) spread
5-in-1 Detailed
compound. The gouge point (3) is used to remove putty/caulk from open
Scraper Tool
cracks. The curved area (4) is used to clean roller covers. The flat side (5) can be
P/N2366227
used to open paint tins.
The heat gun carry case with AngleLoc has been specifically designed to
Carry Case
locate the heat gun in the upright position for work on uneven surfaces.
P/N2366226
To remove an optional item from the Heat Gun:
1. Set the Heat Gun upright on a level surface and wait until the tip is
cool.
2. Pull the item off the tip.
EN
13