Pando PVMAV 45-18 Manual De Uso E Instalación página 142

INOXPAN S.L.
3.8. REVERSIBLE OPTIONAL DOOR
WARNING: The side on which the door opens should be indicated at the moment of
purchasing the unit, as this must be done by specialized personnel. It can be modified in the
future, please consult with our After-sales Service.
DIAGRAM – MODELS FITTED UNDER A WORKTOP
1. Remove the lower hinge (1) by unscrewing the four locking screws (2). Be careful to hold the
glass door firmly after removing the screws. (Figure 1)
2. Gently pull down to remove the glass door from the upper right hinge and place it on a padded
surface to avoid the risk of damage. Then remove the upper right hinge (5). (Fig. 3) Unscrew
and transfer the hinge (7) and / or door plug (8) from the lower hinge to the opposite side.(Fig.
3)
3. Unscrew and transfer the hinge pin (3) and / or the door stop (4) from the lower hinge to the
opposite side. (Figure 2).
4. Open the cover caps on the left side of the cabinet and use them to cover the screw holes on
the right side.
5. Screw the alternative upper left hinge (7) to the left side of the cabinet. (Fig. 3)
6. Turn the door 180 ° and reposition the door in the designated position. Then, screw the lower
hinge assembly in the designated position to the left and tighten it once the door is levelled.
7. Transfer the handle and plugs to the opposite positions and then reassemble the ventilation
grills if necessary.
142
WINE CABINETS