Pando PVMAV 45-18 Manual De Uso E Instalación página 150

INOXPAN S.L.
· FOR SINGLE ZONE WITH LCD DISPLAY (PBE MODELS)
POWER To turn the appliance ON, lightly touch and hold the
temperature display goes on. To turn the appliance OFF, lightly touch and hold the
for 5 seconds until temperature display goes off.
NOTE: Touching the
°F/°C Selector Set the temperature to be displayed in ºFahrenheit or ºCelsius.
LIGHT Used to turn the inner light on/off.
UP Used to increase (warm) the set temperature by 1°C/1°F.
DOWN Used to decrease (cool) the set temperature by 1°C/1°F.
Setting Selector Select the temperature and humidity you want to set.
ICONS ON THE DISPLAY:
 The following symbols will be automatically displayed on the screen as appropriate, being managed
by the unit itself.
Temperature or Error code display for the upper zone
Temperature or Error code display for the middle zone
Temperature or Error code display for the lower zone
Compressor is ON
Heater is ON
Defrosting mode
Warning
Alarm
 The following symbols will be shown on the screen according to user selection.
Dynamic Climate mode
DEMO Eco Demo mode
The interior light is in Showcase mode
Relative humidity display
key once can switch off the audible alarm when the alarm is on.
150
WINE CABINETS
key for 1 second until
key