Techno Line WS 6760 Manual Del Usuario página 15

success. This process is repeated up until 5:00 AM. If still not successful, the daily reception
stops.
Informations

Flashing "radio tower" symbol is displayed, while DCF radio signal reception is running.

A static "radio tower" symbol is displayed after the DCF radio signal reception was
successful.

Please keep a minimal distance of 2.5m to sources of interference such as televisions or
computer screens.

The radio signal reception is weaker in rooms with concrete walls (e.g. in the basement) and
in office buildings. For extreme cases, please put the clock near a window.

There are less atmospheric disturbances at night. A radio time signal reception is usually
possible at that time. One synchronisation per day is sufficient to keep the time display
accuracy at 1 second.
Tip
You can adjust the time manually in case the clock cannot receive the DCF radio signal (due to
interferences, large distance to the sender, obstructions like mountains, etc.) As soon as the radio
signal can be received, the clock will be adjusted automatically.
Radio signal sender coverage up to 1500km distance to Frankfurt/Main.
Manual time set-up (the most important is to quit the reception of radio
controlled signal by holding together "+ "and"-" for 3 seconds in case of
the "radio tower"symbol flashing before set-up )

Press and hold key "MODE" for 3 seconds.

The display for the year is flashing. Use "+ " and "-" to select the year.

Press "MODE " to confirm.

The display for the month is flashing. Use "+ " and "-" to select the month.

Press "MODE " to confirm.

The display for the date is flashing. Use "+ " and "-" to select the date.

Press "MODE " to confirm.

The display for the time zone is flashing. Use "+ "and"-" to select the time zone
(-12 to +12).

Press "MODE " to confirm.

The language selection for the display of the weekdays is flashing. Use "+ " and "- " to select
the language. (GE = German, EN = English, IT = Italian, FR = French, DU = Dutch, SP =
Spanish, DA = Danish)

Press "MODE " to confirm.

The 12/24 hour flashing. Use "+ " and "- " to select

Press "MODE " to confirm

The display for the hour is flashing. Use "+ " and "-" to select the hour.

Press "MODE " to confirm.

The display for the minutes is flashing. Use "+ " and "-" to select the minutes.

Press "MODE " to confirm.

The country /city flashing. Use "+ " and "-" to select the city of Sunrise/Sunset and Moonrise
/Moonset. You can find a list of all cities and their abbreviations at the end of this manual.

Press "MODE " to confirm.