Handicare SystemRoMedic EvaDrive Manual De Usuario página 129

Recommended separation distances between portable and mobile RF communications
equipment and the EvaDrive
The EVADRIVE is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the EvaDrive can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and the EvaDrive as recommended below,
according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according
to the transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected
by absorption and reflection from structures, objects and people.
SystemRoMedic
I N S T R U C T I O N S F O R U S E
TM
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d 1 2 , P
=
0.12
0.38
1,2
3,8
12
m
80 MHz to 800 MHz
d 1 2 , P
=
0.12
0.38
1.2
3.8
12
800 MHz to 2.5 GHz
d 2 3 , P
=
0.24
0.73
2.3
7.3
23
129