Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Press the
ESPRESSO
button to start delivery.
The machine will stop delivery automatically when
the programmed measure is reached (40 ml)
(1,35 oz).
The switch-on/supply button will light up to a blinking
white light when the product is being supplied.
If power supply is interrupted during the coffee
supply cycle, restore power supply and restart the
coffee supply procedure.
If during the supply cycle, water lacks in the tank, water
lack will be indicated by white steady LED on the se-
lected button, while the LED on the other button will
start flashing, then proceed as follows:
- Fill the water tank up to the MAX level indicated.
- Press the power-on/supply button previously se-
lected. The button will start flashing and the coffee
supply procedure will restart.
For a new supply cycle, wait for supply buttons
and multifunction button turning on with steady
white light.
Once supply is over, lift and then lower the capsule
loading lever to unload the exhausted capsule.
PREPARING THE COFFEE
LUNGO DELIVERY
Do steps:
,
,
and
ESPRESSO DELIVERY .
LUNGO
Press the
button to start delivery.
The machine will stop delivery automatically when
the programmed measure is reached (120 ml)
(4,057oz).
For a new supply cycle, wait for supply buttons
and multifunction button turning on with steady
white light.
Once supply is over, lift and then lower the capsule
loading lever to unload the exhausted capsule.
After 5 supplies the switch-on/supply buttons start
blinking fast with white light to indicate that the
capsules drawer is filled. Empty the capsules draw-
er and press one of the buttons to reset the ma-
chine. Now the machine is ready for a new supply.
In case of soluble pods, it is recommended that a brief
plain (i.e. by using only water) supply should be dis-
pensed before inserting the pod, so that you can best
enjoy the product.
EN
in paragraph
9
Publicidad
Tabla de contenido
