Graco 232900 Instrucciones De Funcionamiento página 40

Maintenance
Daily:
Inspect, clean and replace as needed
D Manifold filter, gun filter and inlet stainer
D Wet cup for leakage, tighten if needed
D TSL level
D Gun trigger safety
D Tip wear, replace if necessary
D Electric cord and plug
Weekly:
D Check tightness of wet cup
D Inspect all high pressure paint hoses
Annually:
D Schedule maintenance check at an autho-
rized Graco repair center
Worn Tips Waste Paint
Cost Money!
SPRAY PATTERN WIDTH
in inches (millimeters)
TIP OPENING ENLARGEMENT
FLOW RATE in gpm (lpm)
Note: A 515 tip produces a 10 in. pattern width when measured 12 in. from tip to work
surface; spraying paint with viscosity of 20 sec #4 Zahn cup and at 1600 psi
(110 bar, 11 MPa)
40
309365
1. Perform Cleanup, page 31
2. Wrap cord, place siphon tube set in holder
Tip Wear
NEW
12 11
(305) (280)
New Tip Worn to
.015 .017
1/4 1/3
(0,87) (1,14)
Storage
ti5875b
WORN
OUT
9 5,5
(229) (140)
Worn to Worn to
.019 .021
3/8 1/2
(1,4) (1,74)