Publicidad
Idiomas disponibles
Idiomas disponibles
Fitting in the cabinet
After carrying out the operations for connecting
the power cable to the power supply, following the
relevant instructions, apply the sealing strip around
the hole and position the hob. Carefully tighten the
fixing hooks (fig. 2). Remove any excess sealing strip.
Fig. 2
Fig. 3
NOTE: If the appliance is not installed above an oven,
a separator baffle must be arranged (fig. 3).
FHM 302 2C M
Max 100 mm
– 11 –
Connection to the power supply
The FRANKE cooking hob comes with a 3-core
power cable with free terminals.
If the hob is permanently connected to the power
supply, install a circuit breaker having a contact
opening distance that allows complete disconnection
in the conditions of overvoltage category III.
Make sure:
the plug and the socket are suitable for a 16A current
X
X
both are easily accessible and positioned so that
X
X
no live part can be accessed when inserting or
removing the plug
the plug can be inserted without difficulty and is
X
X
accessible with the appliance installed
that once the plug is inserted, the hob is not
X
X
resting on it when installed in the cabinet
the terminals of two appliances are not connected
X
X
to the same plug
3 x 1.5 mm2 H05VV-F type cable is used when
XX
replacing the power cable.
to respect the polarities of the free terminals
X
X
(Brown=Live, Blue=Neutral, Yellow/Green=Earth).
BLU
BLUE
GIALLO-VERDE
YELLOW-GREEN
MARRONE
BROWN
NOTE: Make sure the characteristics of your
household electrical power supply (voltage,
maximum output and current) are compatible with
those of your FRANKE hob.
L
N
EN
Publicidad
