SICK WTM12L MultiMode Serie Instrucciones De Uso página 59

6.4.3 Teaching in sensor in MultiMode 1 and 1+6:
6.4.4 Setting in MultiMode 3-5:
8027716.1HYU/2023/04/25 | SICK
Subject to change without notice
Teaching in the sensor with background suppression
1. Position object in the desired position and press the control element for 1-3 sec‐
onds until the yellow LED flashes.
1...3 sec.
✓
The sensor is adjusted and ready for operation.
Table 7: Teach result with object
Object present
Please refer to the enclosed "IO-Link photoelectric sensors" operating instructions for
information about adjusting the IO-Link sensing range.
Teaching in the sensor with background suppression and 2 switching points
NOTE
In MultiMode 4: First taught-in sensing range is always Q1 and is symbolized by LED
3. Second taught-in sensing range is always Q2 and is symbolized by LED 5.
1. Position object in desired position 1 and press the control element for 1-3 seconds
until the yellow LED flashes.
OPERATING INSTRUCTIONS
3 4 5
6
2
1 M
O P E R A T I N G I N S T R U C T I O N S | WTM12L MultiMode
en
59