Switching Off The Collar - Num'axes CANIBEEP PRO Manual De Instrucciones

Fitting the strap

Switching on the collar

Before using the collar, be sure you properly tightened the 4 screws of the top in order to
maintain the water tightness of your product.
To switch On your CANIBEEP PRO collar touch the magnetic switch position indicator with the
magnetic key for at least one second. The magnetic switch position indicator is located at the
back of the collar (under the NUM'AXES logo - see Diagram 4).
The collar will emit two low pitch beep sounds and the red indicator light will fl ash briefl y
indicating the CANIBEEP PRO is On.

Switching off the collar


To switch Off your CANIBEEP PRO collar touch the magnetic switch position indicator with the
magnetic key for at least one second (see Diagram 4).
The collar will emit one low pitch beep sound and the red indicator light will fl ash briefl y
indicating the CANIBEEP PRO is Off.
GB - 19
Diagram 3
Diagram 4