Descargar Imprimir esta página

Alcad SCM-150 Instrucciones De Montaje página 9

Ocultar thumbs Ver también para SCM-150:

Publicidad

VIDEOPORTERO
CARACTERÍSTICAS TÉCNICAS - TECHNICAL CHARACTERISTICS - CARACTÉRISTIQUES TECHNIQUES
Nota: Valores de referencia suministrados para la comprobación del equipo. No utilizar las bornas del equipo para alimentar
dispositivos adicionales sin consulta previa al fabricante.
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Note: Reference values are provided only to enable the checking of equipment. Do not use the terminals of the equipment to feed
additional devices without first consulting the manufacturer.
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Note: Valeurs de références fournies pour la vérification de l'équipement. N'utiliser pas les bornes de l'équipement pour alimenter des
dispositifs supplémentaires sans information préalable du fabricant.
SOPORTE DE CONEXIONES SCM-150 - CONNECTION BRACKET SCM-150 - SUPPORT DE CONNEXIONS SCM-150
TERMINALS
(1) Habiendo colocado el interruptor SW1 del soporte de conexiones en la posición A
(1) Having set the switch SW1 of the connection bracket to position A
(1) Ayant placé l'interrupteur SW1 du support de connexions à la position A
Temperatura de funcionamiento - Operating temperature - Température de travail
2
HILOS
-
2-WIRE
BORNAS
INACTIVO
INACTIVE
BORNES
INACTIF
+, –
B1, B2
26, 27 (1)
S5, S2
VIDEODOOR
ENTRY
REPOSO
AT REST
VEILLE
10 - 18 V
10 - 18 V
10 - 18 V
10 - 18 V
Tone max. 16 Vpp
0 V
SYSTEMS
-
VIDÉOPORTIER
TRABAJO
WORKING
TRAVAIL
0 V
0 V
0 V
+5...+55 ºC
2
FILS
9

Publicidad

loading

Este manual también es adecuado para:

9630046