Publicidad
Idiomas disponibles
Idiomas disponibles
3.2.
Preset Store (Save a Station):
You may store your preferred FM stations to the preset station memories. There are
50 memory presets in your radio. Presets are remembered by your radio in the event of a
power failure.
The procedure for setting presets and using them to tune stations is the same for DAB
modes:
In FM mode, select the desired Frequency. Then press [MENU] and use [] and []to select
[Preset store]. Now Press
the preset number under which you will store the station. Press [ENTER] to confirm.
Bluetooth Mode
You must follow several steps to connect your mobile phone:
1.
Activate Bluetooth from your mobile phone (please refer to your phone's user manual)
2.
Press POWER button to turn on the unit, then press the MODE button repeatedly until the
"Bluetooth searching..." indicator appears on the LCD display. It will be ready to pair automatically.
3.
Use your mobile phone to search for the Bluetooth device named "Lenco DAR-051/Lenco DAR-251".
4.
Select "Lenco DAR-051/Lenco DAR-251" on your phone and it present the option to connect or not.
Please connect to it using the password "0000" (if any). When you are successfully connected, the
Bluetooth indicator "Bluetooth connected" appears on the LCD display.
Automatically Connecting with Your Phone
Pairing is only needed the first time the unit and phone are used together. When the unit and phone have
been paired once, they will automatically connect when the unit is on and Bluetooth is activated on the
phone. The next time you power on, the unit will automatically connect to the most recently connected
mobile phone.
Play from Bluetooth Device
After successful Bluetooth connection, press the
tracks backwards or forwards. To pause or resume play, press the
button
to disconnect all paired Bluetooth devices.
Playing a compact disc (CD)
NOTE: Never touch the laser lens inside the CD compartment. Clean the laser lens using a CD cleaner disc if
it becomes dirty.
1.
Press the POWER button to turn on the unit.
2.
Press the MODE button repeatedly to select the CD function.
3.
Press the
button to open the CD door and insert a CD into the tray (with printed label side facing
up).
4.
Press the
button again to close the CD DOOR and the disc will rotate for a few seconds, then play
the 1st track automatically.
5.
To temporarily stop playback, press the
6.
Press the
button to STOP play.
REVERSE/FORWARD
1.
The
and
Buttons used to jump to a different track number or hold to scan disc tracks at high
speed.
2.
Press the
button once to skip to the beginning of the current track. Press it two or more times to hear
previous tracks on the disc.
/
to view the stored stations, and then press [ENTER] to select
button to play. Press the
button, and to resume playback, press it again.
- EN 15 -
or
button to skip the
button again. Press and hold the
Publicidad
