Makita DRC300Z Manual De Instrucciones página 45

Changing the name of a registered robotic cleaner
This setting only changes the robotic cleaner name in the App. The SSID for Wi -
Fi® will not be changed.
1. On the [Robot Settings] screen, tap on [Edit Robot Name].
2. Enter a new name (Up to 8 characters).
3. When you have finished entering the name, tap on [Save].
Setting cleaning options
1. On the [Robot Settings] screen, tap on On/Off (colored green when it is On) at
the side of [Continuous Cleaning] or [Prioritize Homing] if needed.
• [Continuous Cleaning]: Select this option when the battery capacity is lost
before the robotic cleaner cleans all of the cleaning area and you want to
resume cleaning the area left uncleaned the next time.
• [Prioritize Homing]: This setting is recommended when the robotic cleaner
often fails to go back to the starting point of cleaning. The robotic cleaner
begins to return to the starting point of cleaning, provided that there is more
remaining battery capacity than usual.
• [Boundary Sensing]: Select this option when using the magnetic boundary
line. The robotic cleaner detects the magnetic boundary line as the boundary.
(See page 20.)
Changing the PIN code
The PIN code of the robotic cleaner can be changed. If you forget the PIN code
you set, refer to "Resetting the settings" on page 23 for resetting the robotic
cleaner to the factory defaults.
To check the factory default PIN code, refer to "Initial setting" on page 33.
1. On the [Robot Settings] screen, tap on [Change PIN Code].
42 ENGLISH