4
Press the Scan Slides or Negatives button (
The scan is displayed in the HP Image Zone software. If multiple selection
areas were detected, the selections are displayed as separate scanned
images.
Note
5
When finished, remove the negative strip. Place the negative strip holder
back into the slide holder for storage.
Scan documents
You can scan one or more documents to a file or software application by using
the Scan Document button ( ) on the front of the scanner.
1
Place the original face down in the upper right hand corner on the scanner
glass as shown by the corner reference mark ( ) on the scanner.
2
Close the scanner lid.
3
Press the Scan Document button ( ) on the front of the scanner.
4
Choose your options for scanning documents, including specifying a
destination for the scan.
5
Follow the on-screen instructions to finish scanning or to scan additional
documents.
When you are done, all the scanned documents appear in the destination
you selected (for example, a software application or a file).
User's Manual
The Preview setting for the Scan Slides or Negatives button (
must be set to off to scan multiple pictures with one scan. Normally
the Preview setting is set to off already. To change the Preview
setting for the Scan Slides or Negatives button (
settings" on page 14.
) on the front of the scanner.
)
), see "Change
11