COMPACT 1.4
ES
EN
Air conditioning for vehicles
11
Once these operations are complete, dismount
11
the console, turning the nuts (A) until the EPDM
seal is compressed between 3 and 5 mm
approximately, then turn the nuts at the base of
the Compact (B) and the upper nuts of support
C. Diagram A.
Important: In order to prevent possible filtrations
!
of water, ensure the seal is tight with the base of
the Compact - Torque 1.3 a 1.8 kg. As indicated
in Diagram A.
Turn nuts "A" to tighten the seal between 3 and 5
mm and then tighten nuts "B" and "C".
12
Mount the console again using the original
12
screws.
12
20