Kenwood KDC-BT375U Manual De Instrucciones página 12

CD/USB/iPod/ANDROID
Start playback
The source changes automatically and playback starts.
CD
Eject disc Label side
USB input terminal
USB
CA-U1EX (max.: 500 mA)
(optional accessory)
iPod/iPhone
KCA-iP102/KCA-iP103
(optional accessory)*1 or
accessory of the iPod/iPhone*2
ANDROID*3
USB cable*2
(commercially available)
8
ENGLISH
To On the faceplate
Play back/pause Press 6 IW.
Reverse/Fast-forward*4 Press and hold S / T.
Select a track/file Press S / T.
Select a folder*5 Press 2
Repeat play*4*6 Press 4
[TRACK REPEAT]/[ALL REPEAT]
[FILE REPEAT]/[FOLDER REPEAT]/[ALL REPEAT] : MP3/WMA/AAC/WAV/
[FILE REPEAT]/[FOLDER REPEAT]/[REPEAT OFF] : iPod
Random play*4*6 Press 3
[DISC RANDOM]/[RANDOM OFF]
[FOLDER RANDOM]/[RANDOM OFF] : MP3/WMA/AAC/WAV/FLAC file or
Press and hold 3
*1 KCA-iP102: 30-pin type, KCA-iP103: Lightning type
*2 Do not leave the cable inside the car when not used.
*3 You can control Android device using the Android device itself via other media player application installed in the Android
device.
*4 Not applicable for ANDROID.
*5 For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ANDROID.
*6 For iPod: Applicable only when [MODE OFF] is selected. (Page 9)
*7 For CD: Only for MP3/WMA/AAC files.
On the remote control
Press ENT IW.
Press and hold S / T (+).
Press S / T (+).
/ 1 . Press #FM+/ AM–.
repeatedly.
: Audio CD
FLAC file
repeatedly.
: Audio CD
iPod
to select [ALL RANDOM].*7