Cleaning With Accessory Tools; Draining Recovery Tank - Tennant 1200 Serie Manual De Operador

OPERATION
4. If brush stops, the circuit breaker may have been
tripped. Unplug power cord, check brush for
obstruction. Push brush reset button to resume
(Figure 7).
FIG. 7
5. To clean heavily soiled areas, repeat cleaning path
from different direction.
6. Observe recovery site window, when recovery
appears to stop, drain recovery tank (See
DRAINING TANKS).

CLEANING WITH ACCESSORY TOOLS

1. Connect accessory tool hoses to solution hose
coupler and vacuum hose port located at front of
machine (Figure 8).
FIG. 8
2. Turn main power switch on (Figure 9).
FIG. 9
8
Home Find... Go To..
3. Operate accessory tools as normal (Figure 10).
NOTE: When cleaning upholstery, always check
cleaning instructions sewn in furniture by
manufacturer.
FIG. 10
WARNING: Do Not Pick Up Flammable
Materials Or Reactive Metals.
4. After cleaning, relieve water pressure from tool
before disconnecting hose. Squeeze trigger for
five seconds after turning main power switch off.
DRAINING TANKS
FOR SAFETY: Before leaving or servicing
machine, turn off machine and unplug cord from
wall outlet.

DRAINING RECOVERY TANK

1. Turn machine off and unplug power cord.
2. Hinge open cover, lift recovery tank out and empty
(Figure 11).
FIG. 11
NOTE: Make sure to rinse out recovery tank before
refilling solution tank.
Tennant 1200 (02- -04)