Publicidad
Idiomas disponibles
Idiomas disponibles
Valve Wiring:
Motor
Motor Connector (mates with Deutsch Connector DT06-2S and W2S)
PIN
1
Motor +
2
Motor -
Flow Connector (mates with Deutsch Connector DT06-4S and W4SB)
PIN
1
Flow Signal
2
Shield
3
Ground
4
Power
Pressure Connector (mates with Deutsch Connector DT06-4S and W4SA)
PIN
1
Pressure Signal
2
Shield
3
Ground
4
Power
Display/Interface Connector (mates with Deutsch Connector DT06-6S & W6S)
PIN
1
CAN HI
2
Shield
3
Ground
4
Battery Voltage
5
CAFS out (Solenoid connection)
6
CAN LO
5.2 MECHANICAL INSTALLATION
The 9335 valve controller display is attached to the panel using four 10-24 socket-head cap-screws . An installation
torque of 6-8 in-lbs should be applied when installing the valve controller display to prevent damage to the enclosure .
Flow
Pressure
SCALE 3.000
Display
Page 06
Publicidad
