34
Models with 5-Point Harness
Ê
1. Locate the harness adjustment button under
the seat flap. Depress the harness adjustment
button and pull the shoulder straps out to
Ê
loosen the harness
.
2. Behind the seat, pull the adjustment strap
down until the metal junction plate is below
the owner's manual pocket. Remove the ends
of the two shoulder straps from the metal
Ë
junction plate
. From the front of the seat,
pull the straps through the harness slots.
Insert the straps back through the appropriate
Ë
harness slots as determined in step 2 on
page 31.
3. Behind the seat, push both shoulder straps
under the owner's manual pocket and out the
other end. Reassemble the strap ends onto
Ë
the metal junction plate
. The ends of the
straps have two loops. Follow the appropriate
instructions for a smaller or larger baby: