58
Models with 5-Point Harness
To wash the safety seat pad:
1. Detach the harness shoulder
Ê
straps from the junction plate by
following the instructions on
page 34.
2. Below the owner's manual
pocket, to the left and right, are
small anchor buckles attached to
the waist straps of the harness.
Ë
Push aside the small tab that holds
Ê
the anchor buckles in place
and
pull the anchor buckles out of their
indentations. Push a corner of each
Ë
anchor buckle back into its slot
.
3. From the front of the safety seat,
pull all shoulder and waist harness
straps through their slots.