Kenwood KAX950ME Instrucciones página 9

Safety
Read these instructions carefully and retain for future
reference.
Before using for the first time, remove all packaging
and any labels. Wash the parts: see 'Cleaning'.
Thaw frozen food thoroughly before processing
through the attachment.
Always ensure bones and rind etc are removed from
the meat before mincing.
When mincing nuts only feed a few down at a time
and allow the scroll to pick them up before adding
any more.
Turn the speed control to the 'O'(OFF) position and
unplug:
before fitting or removing parts/attachments
after use
before cleaning.
Always use the pusher supplied. Never put your
fingers or utensils in the feed tube.
Warning - the cutting blade is sharp, handle with care
both in use and cleaning.
Ensure the attachment is secured in position before
switching on.
Never use a damaged attachment. Get it checked or
repaired: see 'Service and customer care'.
Never use an unauthorised attachment, or more than
one attachment at once.
Misuse of your attachment can result in injury.
Do not operate your appliance near the edge, or
overhanging the work surface or apply force to the
attachment when fitted, as this may cause the unit
to become unstable and tip over, which may result in
injury.
Do not move or raise the mixer head with an
attachment fitted as the Stand Mixer could become
unstable.
Children should be supervised to ensure that they do
not play with the appliance.
2