Publicidad
Idiomas disponibles
Idiomas disponibles
In case of damage and improper use of the
battery, vapours may be emitted. Provide for
fresh air and seek medical help in case of
complaints. The vapours can irritate the respira-
tory system.
When the battery is defective, liquid can
escape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.
Functional Description
Read all safety warnings and all
instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fire and/or serious injury.
While reading the operating instructions, unfold the
graphics page for the machine and leave it open.
Intended Use
The power tool is intended for driving in and loosening
screws as well as for drilling in wood, metal and plastic.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Screwdriver bit*
2 Tool holder
3 Locking sleeve
4 Torque presetting ring
5 Soft grip
6 Rotational direction switch
7 On/Off switch
8 Battery unlocking button
9 Battery*
10 "Power Light"
11 Drill bit with hexagon shank*
*The accessories illustrated or described are not
included as standard delivery.
24 | English
Technical Data
Cordless Screwdriver
Art. No.
Rated voltage
No-load speed
Max. torque for hard/soft
screwdriving application
according to ISO 5393
Torque adjustment range
Max. screw dia.
Max. drilling dia.
– Steel
– Wood
Weight according to
EPTA-Procedure 01/2003
Noise/Vibration Information
Measured values determined according to EN 60745.
Typically the A-weighted sound pressure level of the
product is less than 70 dB(A). Uncertainty K =3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Drilling
into
metal:
2
a
<2.5 m/s
, Uncertainty K=1.5 m/s
h
Screwdriving: Vibration emission value a
Uncertainty K=1.5 m/s
The vibration emission level given in this information
sheet has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a pre-
liminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different accesso-
ries or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the expo-
sure level over the total working period.
Identify additional safety measures to protect the oper-
ator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organ-
isation of work patterns.
BTI-AS 10,8 V LI
V=
rpm
Nm
Nm
0.9 – 4.8
mm
mm
mm
kg
Vibration
emission
2
,
<2.5 m/s
h
2
.
2 609 932 598 • 14.11.07
013172
10.8
0 – 500
18/7
6
8
10
0.8
value
2
,
Publicidad
