Publicidad
Idiomas disponibles
Idiomas disponibles
Screwdriving (see figure
The machine is also suitable for occasional
screwdriving applications, however, not for
screwdriving applications with extreme re-
ductions of speed at which the overload
clutch frequently responds.
For screwdriving, the universal bit holder with
SDS-plus shank (accessory) must be used.
– Set the impact stop switch 5 to "Drill".
– Set the direction of rotation to right-hand rota-
tion.
– Regulate the speed with the On/Off switch 7.
Maintenance and Cleaning
Before any work on the machine itself, re-
move the battery.
For safe and proper working, always keep
the machine and the ventilation slots clean.
Keep the tool holder clean at all times.
Changing the Dust Protection Cap
A damaged dust protection cap should be
changed immediately. We recommend having
this carried out by an after-sales service.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for BTI power tools.
In all correspondence and spare parts orders,
please always include the 6-digit order number
given on the nameplate of the machine.
)
Environmental Protection
F
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for catego-
rized recycling.
Defective or worn out batteries must be recycled
according to the guidelines 91/157/EEC recycling.
Service
BTI Befestigungstechnik GmbH & Co. KG
Postfach 40
74665 Ingelfingen
Salzstraße 51
74653 Ingelfingen-Criesbach
Telefon:
Telefax:
Internet:
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents. EN 50 144
(Battery powered products) and EN 60 335 (Bat-
tery charger) according to the provisions of the di-
rectives 73/23/EEC, 89/336/EEC, 98/37/EC.
ppa. U. Delz
BTI Befestigungstechnik GmbH & Co. KG
74653 Ingelfingen
Subject to change without notice
English - 5
Recycle raw materials instead of
disposing as waste
The machine, accessories and
packaging should be sorted for en-
vironmental-friendly recycling.
Nickel-cadmium-battery:
If your product is equipped
with a nickel-cadmium-bat-
tery, the battery must be
collected, recycled or dis-
posed of in an environmen-
tally-friendly way.
..........................................................
.......................................................
.................................................................
Declaration of Conformity
0 79 40/141-0
0 79 40/141-64
www.bti.de
i.V. G. Hub
Publicidad
