Care and Maintenance
100
EN
General
WARNING! Always switch off the power at the main consumer unit before cleaning
and maintenance.
• Clean the appliance regularly to ensure its safe use and reliability.
• It is recommended to clean the appliance when it is still slightly warm. Do not clean when hot.
• Do not clean the door glass with abrasive cleaners or sharp metal scrapers as these can scratch the
surface or damage the glass.
• Never leave acidic substances (lemon juice, vinegar) on stainless steel parts.
• Do not use high pressure steam cleaners for cleaning.
• Do not use metal scourers for cleaning.
Cleaning the accessories
Clean the accessories in hot soapy water using a damp cloth, soft brush or sponge. Dry thoroughly before use.
Cleaning the oven cavity
1. Open the door and remove all accessories.
2. Clean the cavity with a damp cloth, soft brush or fine sponge and then wipe dry.
3. In case of heavy soiling, use hot soapy water and a sponge. Wipe dry with a damp cloth.
Disassemble the oven door for cleaning
1. Fully open the door.
2. Pull both hinge locks fully forward.
3. Close the door by approximately one third until you feel the door stop..
4. Continue to close the door until nearly closed, then carefully left the door up and out to clear the oven.
5. After cleaning, replace the door in reverse order.
6. Ensure the door opens and closes completely before use. Repeat this sequence if the door is not fitted
correctly.