Use
EN
Before you start
WARNING: Read the instructions before using the appliance.
Switch on the power to the appliance at the mains consumer unit, the appliance will beep once and is ready
for use.
Using your oven
Before first use
• Remove all stickers, surface protection foils and packing materials.
• Remove all accessories and the side racks from the cavity.
• Clean the appliance cavity and all accessories as described in Care and maintenance.
• Turn the oven on, choose Convection mode and set the temperature to 250 °C. Close the door and
cook for 90 minutes to burn off any remaining manufacturing residues. (See the section "Cooking Mode"
below.)
IMPORTANT: Keep the kitchen well ventilated during this first use to help disperse
the odours produced. Keep kitchen doors closed and ensure children and pets are
Setting the time
Before the oven can be used, the time should be set to ensure all timer functions work correctly.
1. After the oven has been switched on at the consumer unit, touch the Time / Clock Selector "
the hours using the Slider Selector or the " < " and " > " controls.
2. Touch the Time / Clock Selector"
3. Touch the Timer / Clock selector "
NOTE: The clock has a 24 hour display.
CAUTION: The appliance will not switch off automatically after use.
" again, and set the minutes in the same way.
" once more to store the set time.
Never leave the appliance unattended during use!
not present.
71
" and set