Canon EOS 6D Manual De Instrucciones página 164

Selecting the Connection Destination
Register the target camera to connect to via a wireless LAN.
The camera can be connected to only one camera at a time.
W-14
Select [Wi-Fi function].
1
Under the [53] tab, set [Wi-Fi] to
[Enable], then select [Wi-Fi
function].
Select [z].
2
Press the <V> or <U> key to
select [z] (Transfer imgs between
cameras), then press <0>.
Start the connection on the target
3
camera.
When the screen on the left is
displayed, start the connection on the
target camera as well. For the
operation procedure, refer to the
instruction manual of the target
camera.
When a connection is established,
the settings are automatically saved
and the images on the card are
displayed.