Canon EOS 6D Manual De Instrucciones página 198

Logging the Route Traveled
When the GPS logging function is enabled, the <x> icon is displayed on
the camera LCD panel and LCD monitor.
Location Information Logs
Location information is recorded at regular intervals along the route the
camera traveled, as shown in [Position update timing] in the table
below. Daily logs are saved on the camera's internal memory. The
number of days for which you can store logs depends on the positioning
interval you specify in [Position update timing] (p.G-11).
Log File Capacity, by Positioning Interval
Position update
timing
Every 1 sec.
Every 5 sec.
Every 10 sec.
Every 15 sec.
* Capacity when logging eight hours per day
Log file names consist of date and number (e.g.12103100). Files are
created per day. When the time zone is changed, a different file is
created.
Log files stored on the internal memory can be transferred to a card
(p.G-15).
When the camera's internal memory becomes full, the oldest log
files are overwritten with new information, one by one.
G-14
Set [Log GPS position] to
5
[Enable].
Log Files (Approx.)
4.4 days
22 days
44 days
67 days
Position update
timing
Every 30 sec.
Every 1 min.
Every 2 min.
Every 5 min.
Log Files (Approx.)
100 days
100 days
100 days
100 days