Canon EOS 6D Manual De Instrucciones página 169

Reconnecting
The camera can reconnect to another camera for which connection
settings have been registered.
Select [Wi-Fi function].
1
Under the [53] tab, set [Wi-Fi] to
[Enable], then select [Wi-Fi
function].
Select [z].
2
Select [z] (Transfer imgs between
cameras) and press <0>.
Establish a connection.
3
Select [Connect] and press <0>.
On the confirmation screen, select
[OK].
Perform the reconnection procedure
on the target camera as well.
The images on the card are displayed
and the images to send can be
selected.
When settings for multiple connection
destinations are registered, select
[Choose set.], select the connection
destination, then connect to the
destination.
By default, settings are named after
the nickname of the camera that was
connected to.
W-19